Thông số kỹ thuật KV-NC32T
| Thông số | Giá trị |
|---|---|
| Model | KV-NC32T |
| Power voltage | 24 VDC (+10%/-15%) |
| Operating ambient temperature | 0 to 55°C (32 to 131°F) (no freezing) |
| Operating ambient humidity | 5 to 95% RH (no condensation) |
| Operating environment | As little dust and corrosive gas as possible |
| Noise immunity | 1500 V peak-to-peak or more, pulse duration 1 μs, 50 ns (based on noise simulator) Conforms to IEC standards (IEC61000-4-2/3/4/6) |
| Withstand voltage | 1500 VAC for 1 minute, between power supply terminal and I/O terminals and between all external terminals and case (1000 VAC for 1 minute, between power supply terminal and output terminals for the transistor output type expansion I/O unit) |
| Insulation resistance | 50 MΩ or more (500 VDC megger used to perform measurements between power supply terminal and input terminals, and between all external terminals and case) |
| Storage temperature | −25 to +75°C (−13 to +167°F) |
| Vibration resistance (Intermittent vibration) | Frequency: 5 to 9 Hz, Amplitude: 3.5 mm (0.14″) |
| Vibration resistance (Continuous vibration) | Frequency: 9 to 150 Hz, Acceleration: 9.8 m/s² (32.2’/s²) |
| Shock resistance | Acceleration: 150 m/s² (492.1’/s²), application time: 11 ms, three times in each of the X, Y, and Z directions |
| Operating altitude | 2000 m (6561.7′) |
| Overvoltage category | I |
| Pollution degree | 2 |
| Calculation control method | Program storage method |
| I/O control method | Refresh method |
| Program language | Expanded ladder, KV Script, mnemonic |
| Number of instructions | Basic instruction: 81 types and 182 instructions, Application instruction: 39 types and 56 instructions, Calculation instruction: 123 types and 311 instructions, Expansion instruction: 92 types and 141 instructions, Total: 335 types and 690 instructions |
| Instruction execution speed | Basic instruction: 50 ns minimum, Application instruction: 170 ns minimum |
| Program capacity | 32k steps |
| Maximum number of attachable I/O units | 8 |
| Maximum number of I/O points | 256 |
| Input relay/Output relay/Internal auxiliary relay | Total of 9600 points 1 bit (R000 to R59915) |
| Link relay | 8192 points 1 bit (B0 to B1FFF) |
| Internal auxiliary relay | 9600 points 1 bit (MR000 to MR59915) |
| Latch relay | 3200 points 1 bit (LR000 to LR19915) |
| Control relay | 1440 points 1 bit (CR000 to CR8915) |
| Timer | 512 points 32 bits (T0 to T511) |
| Counter | 256 points 32 bits (C0 to C255) |
| Data memory | 32768 points 16 bit (DM0 to DM32767) |
| Link register | 16384 points 16 bit (W0 to W3FFF) |
| Temporary memory | 512 points 16 bit (TM0 to TM511) |
| High-speed counter | 3 points (CTH0 to CTH2), 32-bit automatic reset counter (Input response: 100 kHz per single phase, 50 kHz per phase difference) |
| High-speed counter comparator | 6 points (CTC0 to CTC5), 32 bits, two points per high-speed counter |
| Index register | 12 points 32 bit (Z01 to Z12) |
| Control memory | 9000 points 16 bit (CM0 to CM8999) |
| Positioning pulse output | 3 axes, Maximum output frequency: 100 kHz |
| Base unit I/O | Input: 16 points, Output: 16 points, Input common: 1 point, Output common: 1 point |
| Number of comments and labels that can be stored in the main unit | Device comment: 20000, Label: 28000 |
| Power off hold function | Program memory: Flash ROM can be rewritten 10000 times, Device: Nonvolatile RAM |
| Clock function | ±60 seconds/month (at 25°C / 77°F) |
| Self-diagnosis function | CPU error, RAM error, and other problems |
| Input specifications | Relay number: General input: R000 to R009 (10 points), High-speed A-phase and B-phase input: R010 to R015 (6 points) |
| Input mode | 24 VDC input (open collector) |
| Maximum input voltage | 26.4 VDC |
| Rated input voltage | 24 VDC (General input: 5.3 mA, High-speed A-phase and B-phase input: 6.5 mA) |
| Minimum ON voltage | 19 VDC |
| Maximum OFF current | 1.5 mA |
| Common method | All points/1 common (1 terminal) |
| Circuit delay time | General input: OFF to ON: Max. 30 μs (Typ. 3.5 μs), ON to OFF: Max. 50 μs (Typ. 15 μs) |
| Input time constant | Normal: 10 ms, When the HSP instruction is used: 10 μs |
| Response frequency | (High-speed A-phase and B-phase input) Single phase: 100 kHz, phase difference: 50 kHz, 24 V ±10%, Duty 50% |
| Output specifications | Relay number: General output: R506 to R515 (10 points), High-speed output: R500 to R505 (6 points) |
| Output mode | MOSFET (N-ch) output |
| Rated load | 30 VDC, General output: 0.2 A (1.6 A/common), High-speed output: 0.3 A (1.6 A/common) |
| Maximum OFF voltage | 30 VDC |
| Leakage current at OFF | 100 μA or less |
| Residual voltage at ON | 0.6 VDC or less |
| Common method | 16 points/1 common |
| ON/OFF response time | General output: OFF to ON: 100 μs, ON to OFF: 200 μs, High-speed output: OFF to ON: 2 μs, ON to OFF: 5 μs |
| Overcurrent protection | Protection provided for each common |
| Output frequency | High-speed output: 100 kHz (7 to 100 mA load) |
| Built-in serial port | Interface: RS-232C, Connection: Modular connector |
| Transmission specifications RS-232C | Baud rate: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps |
| Connector type | Modular connector (RJ-11 6P2C) (two lines) |
| Communication length | 15 m (49.2′) |
| Protocol | ASCII, ADPN, K-servo, Host terminal monitoring |
| Proximity sensors | Distance: 6 to 24 VDC, Output: 2 points |
| Copyright | Haiphongtech.vn |
Liên hệ
Công ty TNHH Hải Phòng Tech là đại lý phân phối chính thức của hãng KEYENCE. Quý khách vui lòng liên hệ Hải Phòng Tech để nhận được báo giá ưu đãi nhất.
