Thông số kỹ thuật KV-N60ATP
| Thông số | Giá trị |
|---|---|
| Model | KV-N60ATP |
| Power voltage | 100 to 240 VAC (+10%/-15%) |
| Operating ambient temperature | 0 to 55°C (32 to 131°F) (no freezing) |
| Operating ambient humidity | 5 to 95% RH (no condensation) |
| Operating environment | As little dust and corrosive gas as possible |
| Noise immunity | 1500 V peak-to-peak or more, pulse duration 1 μs, 50 ns (IEC standard compliant) |
| Withstand voltage | 1500 VAC for 1 minute, between power supply terminal and I/O terminals |
| Insulation resistance | 50 MΩ or more (500 VDC megger used for measurements) |
| Output power supply voltage | 24 VDC (±10%; output capacity: 0.6 A) |
| Storage temperature | −25 to +75°C (−13 to +167°F) |
| Vibration resistance – Intermittent vibration (5 to 9 Hz) | Amplitude: 3.5 mm (0.14″) |
| Vibration resistance – Intermittent vibration (9 to 150 Hz) | Acceleration: 9.8 m/s² (32.2’/s²) |
| Vibration resistance – Continuous vibration (5 to 9 Hz) | Amplitude: 1.75 mm (0.07″) |
| Vibration resistance – Continuous vibration (9 to 150 Hz) | Acceleration: 4.9 m/s² (16.1’/s²) |
| Shock resistance | Acceleration: 150 m/s² (492.1’/s²), application time: 11 ms, three times in each direction |
| Operating altitude | 2000 m (6561.7′) |
| Overvoltage category | AC: II, DC: I |
| Pollution degree | 2 |
| Calculation control method | Program storage method |
| Program language | Expanded ladder, KV Script, mnemonic |
| Number of instructions | 335 types and 690 instructions |
| Instruction execution speed | Basic instruction: 50 ns, Application instruction: 170 ns |
| Program capacity | 16k steps |
| Maximum number of attachable I/O units | 8 |
| Maximum number of I/O points | 256 (excluding the base unit I/O) |
| Input relay/Output relay/Internal auxiliary relay | Total of 9600 points 1 bit (R000 to R59915) |
| Link relay | 8192 points 1 bit (B0 to B1FFF) |
| Internal auxiliary relay | 9600 points 1 bit (MR000 to MR59915) |
| Latch relay | 3200 points 1 bit (LR000 to LR19915) |
| Control relay | 1440 points 1 bit (CR000 to CR8915) |
| Timer | 512 points 32 bit (T0 to T511) |
| Counter | 256 points 32 bit (C0 to C255) |
| Data memory | 32768 points 16 bit (DM0 to DM32767) |
| Link register | 16384 points 16 bit (W0 to W3FFF) |
| Temporary memory | 512 points 16 bit (TM0 to TM511) |
| High-speed counter | 4 points (CTH0 to CTH3), 32-bit automatic reset counter |
| High-speed counter comparator | 8 points (CTC0 to CTC7), 32 bits, two points per high-speed counter |
| Index register | 12 points 32 bit (Z01 to Z12) |
| Control memory | 9000 points 16 bit (CM0 to CM8999) |
| Positioning pulse output | 4 axes, Maximum output frequency: 100 kHz |
| Base unit I/O | Input: 36 points, output: 24 points |
| Number of comments and labels that can be stored in the main unit | Device comment: 20000, Label: 28000 |
| Power off hold function | Program memory: Flash ROM (10000 times rewrite), Device: Nonvolatile RAM |
| Self-diagnosis function | CPU error, RAM error, and other problems |
| Relay number | General input: R000 to R007, High-speed input: R008 to R015 |
| Input mode | 24 VDC input (open collector) |
| Maximum input voltage | 26.4 VDC |
| Rated input voltage | 24 VDC (General input: 5.3 mA, High-speed input: 6.5 mA) |
| Minimum ON voltage | 19 VDC |
| Maximum OFF current | 1.5 mA |
| Common method | General input: All points/1 common, High-speed input: Shared common |
| Circuit delay time | General input: OFF to ON max. 50 µs, High-speed input: OFF to ON max. 2 μs |
| Relay number | General output: R508 to R607 (16 points) |
| Output mode | MOSFET (P-ch) |
| Rated load | 30 VDC, 0.5 A |
| Maximum OFF voltage | 30 VDC |
| Leakage current at OFF | 100 μA or less |
| Residual voltage at ON | 0.8 VDC or less |
| Common method | 8 to 10 points/1 common |
| ON/OFF response time | General output: OFF to ON: 100 μs, High-speed output: OFF to ON: 2 μs |
| Overcurrent protection | Protection provided for each common |
| Output frequency | High-speed output: 100 kHz |
| Built-in serial port | RS-232C, Modular connector |
| Transmission specifications | Baud rate: 1200 to 115200 bps |
| Data format | Start bit: 1 bit, Data bits: 7/8 bits, Stop bits: 1/2 bits |
| Error detection | Parity: Even, odd, none |
| Transmission distance | 15 m (49.2′) |
| Number of transmission units | 1 |
| Indication | SD (green), RD (red) |
| Internal current consumption | 85 VA |
| External dimensions (W x H x D) | 72 x 90 x 90 mm (2.83 x 3.54 x 3.54 inches) |
| Weight | Approx. 360 g (0.79 lb.) |
| Copyright | Haiphongtech.vn |
Liên hệ
Công ty TNHH Hải Phòng Tech là đại lý phân phối chính thức của hãng KEYENCE. Quý khách vui lòng liên hệ Hải Phòng Tech để nhận được báo giá ưu đãi nhất.
