Thông số kỹ thuật KV-SH04PL
| Thông số | Giá trị |
|---|---|
| Model | KV-SH04PL |
| Type | High-speed positioning unit |
| No. of control axes | 4 axes |
| Input | Positive (negative) direction limit switch, origin sensor, stop sensor, continuous instant starting, 1 point per axis for 4 points in total, 24 VDC input possibleForced stop input, 1 point shared by whole axes, 24 VDC input possibleZ-phase input (+) (-), servo end, servo ready, drive alarm, 1 point per axis for 4 points in total, 5 VDC input possible |
| Output | Pulse output (differential line driver): equivalent to AM26C31 (max. 20 mA), Pulse output (open collector): rated load: 30 VDC, 0.1 A or lessDrive alarm reset, servo ON, deviation counter clear, rated load: 30 VDC, 0.1 A or less |
| Output frequency | 1 Hz to 8 MHz |
| Output format | Differential line driver output/open collector output (switched per axis via hardware switch)(1-pulse mode/2-pulse mode/2-phase 1-multiplication/2-phase 2-multiplication/2-phase 4-multiplication) |
| Control mode | Standard mode, High-speed mode |
| Control period | Standard mode: 500 μs, High-speed mode: 62.5 μs |
| Starting time | Standard mode: 500 μs or more, High-speed mode: 8 μs or more (continuous instant starting: 1 μs) |
| Basic operation | Standard mode: Origin return/JOG, linear interpolation (2 to 4 axes), position control (ABS/INC), speed control (+/- direction)High-speed mode: Origin return/JOG, position control (ABS/INC), speed control (+/- direction) |
| Function | Standard mode: Speed change, target change, stop sensor, speed override, stop at specified angle, continuous operation interrupt, forced next point, absolute position follow-up control, sync type follow-up controlHigh-speed mode: Speed change, target change, stop sensor, continuous instant starting |
| Position unit | Standard mode: mm, deg (angle), PLS (pulse count), decimal place 0 to 9, unit conversion functionHigh-speed mode: PLS (pulse count) |
| Position setting range | -2147483648 to 2147483647 |
| Acceleration/deceleration curve | Standard mode: Linear, SINHigh-speed mode: Linear |
| Acceleration/deceleration rate | Acceleration/deceleration individual setting |
| Acceleration/deceleration time | Standard mode: 0 to 65535 ms |
| M-code | 0 to 65000, WITH/AFTER mode |
| Number of points | 100 points/axis |
| Origin return method | Dog type (“With Z phase” or “Without Z phase” can be selected by pushing the button), Dog type inching (“With Z phase” or “Without Z phase”)*1,origin sensor (edge/midpoint/Z-phase), limit switch edge, immediate Z-phase origin return, data set type |
| JOG/inching | Inching (number of pulses can be specified)*1, JOG |
| Teaching | Current coordinate teaching |
| 24 V power input (I/O) | 24 VDC (-15%/+20%) |
| 5 V power output | 5 VDC (±10%), 200 mA or less |
| Others | Multi-axis simultaneous starting based on unit interrupt/inter-unit synchronization |
| Internal current consumption | 200 mA or less, external I/O: 260 mA or less |
| Weight | Approx. 230 g |
| Copyright | Haiphongtech.vn |
Liên hệ
Công ty TNHH Hải Phòng Tech là đại lý phân phối chính thức của hãng KEYENCE. Quý khách vui lòng liên hệ Hải Phòng Tech để nhận được báo giá ưu đãi nhất.
