Thông số kỹ thuật KL-LC1
| Thông số | Giá trị |
|---|---|
| Model | KL-LC1 |
| Measurement type | Load cell |
| Power voltage | 24 VDC ± 10%, Class 2 |
| Operating ambient temperature | 0 to +50°C (no freezing) |
| Operating ambient humidity | 35 to 85%RH(no condensation) |
| Ambient temperature for storage | -20 to +70°C |
| Operating environment | Minimal amount of dust and corrosive gas present |
| Measurement category | – |
| Wire temperature rating | +60°C or more |
| Noise immunity | 1,500 Vp-p or more, pulse width: 1 µs, 50 ns (by way of a noise simulator), conforms to IEC standards (IEC 61000-4-2/-3/-4/-6) |
| Withstand voltage | 1,500 VAC for 1 minute (between the power supply terminal and each terminal and between all the terminals and the case) |
| Insulation resistance | 100 MΩ or more (tested with a 500 VDC megger, between the power supply terminal and each I/O terminal and between all the terminals and the case) |
| Internal current consumption (excluding current for driving input circuits) | 230mA or less |
| Shock resistance | Conforms to JIS B 3502 and IEC 61131-2, 147 m/s², operating time: 11 ms, 3 times in each of the 3 directions |
| Pollution degree | 2 |
| Vibration resistance (Intermittent vibration: Frequency: 10 to 57 Hz, Amplitude: 0.075 mm) | Frequency: 57 to 150 Hz, Acceleration: 9.8 m/s² |
| Vibration resistance (Continuous vibration: Frequency: 10 to 57 Hz, Amplitude: 0.035 mm) | Frequency: 57 to 150 Hz, Acceleration: 4.9 m/s² |
| Weight | approx 350g |
| Number of channels | 1CH |
| Number of ranges | 4 |
| Range switching | Setting: Use the setting switch. |
| Sampling rate | 1 ms (1,000 times/sec.) |
| Input range | Range 1: 0.5 mV/V, Range 2: 1.0 mV/V, Range 3: 2.0 mV/V, Range 4: 3.0 mV/V |
| Resolution (5V, Range 1: 0.5 mV/V) | 0.5 µV, 1/10000 |
| Linearity (0 to 50°C) | ±0.2% of F.S. ± 1 digit |
| Zero-drift (0 to 50°C) | ±0.4% of F.S. ± 1 digit |
| Control input | 2 (Parameters are used to switch between the KL input, peak/bottom hold control input, and 0-point adjustment input.) |
| Control output | 2 transistor (NPN open-collector) outputs (Parameters are used to switch between the KL output and comparator output.) |
| Setting data | Recorded to the EEPROM (rewritable 1,000,000 times) |
| Compatible sensor | 350 Ω |
| External calibration input signal | 2 inputs |
| Maximum input voltage | DC26.4V |
| Control output (Transistor NPN output) | Rated load: DC30V 0.1A |
| KL link specifications | Model: KL-N20V, supported PLC: KEYENCE KV-1000/700; model: KL-N10V, supported PLC: KEYENCE KV-10/16/24/40 |
| Copyright | Haiphongtech.vn |
Liên hệ
Công ty Hải Phòng Tech chuyên cung cấp các sản phẩm KEYENCE. Quý khách vui lòng liên hệ Hải Phòng Tech để nhận được báo giá ưu đãi nhất.
