Thông số kỹ thuật XLN-60-24
| Thông số | Giá trị |
|---|---|
| Mã sản phẩm | XLN-60-24 |
| Tên sản phẩm | XLN-60-24 60W Multiple-Stage Constant Power/Constant Voltage LED Driver |
| OUTPUT | OPEN CIRCUIT VOLTAGE Note15 |
| INPUT | VOLTAGE RANGE |
| PROTECTION | SHORT CIRCUIT |
| ENVIRONMENT | WORKING TEMP. |
| SAFETY&EMC | SAFETY STANDARDS |
| OTHERS | FLICKER Note9 |
| NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃of ambient temperature. 2. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details. 3. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time. 4. Current ripple is measured 50%~100% of maximum voltage under rated power delivery. 5. Standby power consumption is measured at 230VAC. 6. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf) 7. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). 8. To fulfill requirements of the latest ErP regulation for lighting fixture, this LED driver can only be used behind a switch without permanently connected to the mains. 9. Flicker is measured at full load with the light source provided by MEAN WELL. 10. RCM is on a voluntary basis. Non IC classification Independent LED control gear is not suitable for residential installations. 11. This series meets the typical life expectancy of 50000 hours of operation when Tcase,particularly tc point(or TMP, per DLC), is about 75℃ or less. 12. Efficiency is measured at 1050mA/54V output set by DIP switch. 13. Products sourced from the China regions and some models sourced from India may not have the BIS logo,please refer to BIS certificate for details and contact your MEAN WELL sales for more information. 14. Based on IEC 62386-101/102 DALI power on timing and interruption regulations, the set up time needs to test with a DALI controller which can support for DALI power on function, otherwise the start up time will be higher than 0.5 second. 15. Output hiccups under no-load condition.(only for H-type). 16. For more information, please contact with MEAN WELL sales. ※ Product Liability Disclaimer：For detailed information,please refer to https://www.meanwell.com/serviceDisclaimer.aspxFile Name:XLN-60-SPEC 2026-02-04 |
| Copyright | Haiphongtech.vn |
Liên hệ
Vui lòng liên hệ Hải Phòng Tech để biết thêm thông tin về sản phẩm.
