Thông số kỹ thuật XLG-320-48-ABV
| Thông số | Giá trị |
|---|---|
| Mã sản phẩm | XLG-320-48-ABV |
| Tên sản phẩm | XLG-320-48-ABV 315W Constant Power Mode LED Driver |
| RATED CURRENT (Default) | 1400mA |
| RATED POWER Note.11 | 3 15W |
| CONSTANT CURRENT REGION | 150~300V |
| OUTPUT VOLTAGE ADJ. RANGE | NC |
| FULL POWER CURRENT RANGE | 1050~1400mA |
| OPEN CIRCUIT VOLTAGE (max.) | 340V |
| CURRENT ADJ. RANGE | 500~1400mA |
| CURRENT RIPPLE | 5.0% max. @rated current |
| CURRENT TOLERANCE | ±5% |
| RIPPLE & NOISE(max.) | NC |
| VOLTAGE TOLERANCE | NC |
| LINE REGULATION | NC |
| LOAD REGULATION | NC |
| SET UP TIME Note.9 | 500ms/230VAC, 1200ms/115VAC |
| RISE TIME,HOLD UP TIME (Typ.) | 160ms,10ms/230VAC/115VAC(only for V-type) |
| VOLTAGE RANGE Note.2 | 100 ~ 305VAC 142VDC ~ 431VDC (Please refer to “STATIC CHARACTERISTIC” ang “ DRIVING METHODS OF LED MODULE”section) |
| FREQUENCY RANGE | 47 ~ 63Hz |
| POWER FACTOR (Typ.) | PF≧0.98 / 115VAC, PF≧0.95 / 230VAC, PF≧0.92 / 277VAC at full load (Please refer to “Power Factor Characteristic” section) |
| TOTAL HARMONIC DISTORTION | THD< 10% @ load≧50% at 115VAC/230VAC, THD75% at 277VAC; Please refer to “TOTAL HARMONIC DISTORTION (THD)” section |
| EFFICIENCY (Typ.) | 94.5% |
| AC CURRENT (Typ.) | 3A / 120VAC 1.6A / 230VAC 1.3A / 277VAC |
| INRUSH CURRENT(Typ.) | COLD START 45A(twidth=1200μs measured at 50% Ipeak) at 230VAC; Per NEMA 410 |
| MAX. NO. of PSUs on 16A CIRCUIT BREAKER | 2 unit(circuit breaker of type B) / 4 units(circuit breaker of type C) at 230VAC |
| LEAKAGE CURRENT | <0.75mA / 277VAC |
| STANDBY POWER CONSUMPTION Note.5 | Standby power consumption <0.5W for AB-Type(Dimming OFF) |
| SHORT CIRCUIT | Hiccup mode or Constant current limiting, recovers automatically after fault condition is removed |
| OVER VOLTAGE | 350 ~ 380V 190 ~ 220V 63 ~ 78V 27 ~ 34V Shut down output voltage, re-power on to recovery |
| OVER TEMPERATURE Note.12 | L/M/H-Type: Tcase>85℃±5℃,derate power automatically V-Type: Shut down output voltage, re-power on to recover |
| OVER LOAD Note.11 | 108~135%(only for V-type) Hiccup mode or Constant current limiting, recovers automatically after fault condition is removed |
| WORKING TEMP. | Tcase=-40 ~ +85℃(Please refer to “OUTPUT LOAD vs TEMPERATURE” section) |
| MAX. CASE TEMP. | Tcase=+85℃ |
| WORKING HUMIDITY | 20 ~ 95% RH non-condensing |
| STORAGE TEMP., HUMIDITY | -40 ~ +80℃, 10 ~ 95% RH non-condensing |
| TEMP. COEFFICIENT | ±0.03%/℃ (0 ~ 60℃) |
| VIBRATION | 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes |
| SAFETY STANDARDS | UL8750(type”HL”), CSA C22.2 No. 250.13-12; ENEC BS EN/EN61347-1, BS EN/EN61347-2-13 independent, BS EN/EN62384, EN/EN60335-1 compliant to EN 60335-2-89 Annex BB, EN 60335-2-24 Annex CC;GB/T19510.1, GB/T19510.213;EAC TP TC 004; IP67; IS15885(Part2/Sec13)(except for blank type), KC61347-1,KC61347-2-13 approved |
| WITHSTAND VOLTAGE | I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC |
| ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH |
| MTBF | 1476.4K hrs min. Telcordia SR-332(Bellcore) ; 168.1 K hrs min. MIL-HDBK-217F (25℃) |
| DIMENSION | 246*77*39.5mm (L*W*H) |
| PACKING | 1.45Kg;9pcs/14Kg/0.76CUFT |
| Copyright | Haiphongtech.vn |
Liên hệ
Vui lòng liên hệ Hải Phòng Tech để biết thêm thông tin về sản phẩm.
