Thông số kỹ thuật XLG-25
| Thông số | Giá trị |
|---|---|
| Mã sản phẩm | XLG-25 |
| Tên sản phẩm | XLG-25 25W Constant Power Mode LED Driver |
| RATED CURRENT (Default) | 7 0 0 mA |
| CONSTANT CURRENT REGION Note.2 | 22 ~54V |
| RATED POWER | 90VAC ~ 305VAC 25W |
| CURRENT RIPPLE | 5.0% max. @rated current |
| OPEN CIRCUIT VOLTAGE (max.) | 57V |
| CURRENT ADJ. RANGE | 0.25 ~ 1.05A |
| SETUP, RISE TIME Note.3 | 500ms, 100ms/115VAC, 230VAC |
| VOLTAGE RANGE Note.4 | 90 ~ 305VAC 127 ~ 431VDC (Please refer to “STATIC CHARACTERISTIC” section) |
| FREQUENCY RANGE | 47 ~ 63Hz |
| POWER FACTOR | PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC@full load (Please refer to “POWER FACTOR (PF) CHARACTERISTIC” section) |
| TOTAL HARMONIC DISTORTION | THD< 10%(@load≧50%/115VC,230VAC; @load≧75%/277VAC) (Please refer to “TOTAL HARMONIC DISTORTION(THD)” section) |
| EFFICIENCY (Typ.) Note.10 | 88% |
| AC CURRENT | 0.29A / 115VAC 0.15A / 230VAC 0.13A/277VAC |
| INRUSH CURRENT(Typ.) | COLD START 50A(twidth=350μs measured at 50% Ipeak) at 230VAC; Per NEMA 410 |
| MAX. No. of PSUs on 16A CIRCUIT BREAKER | 5 units (circuit breaker of type B) / 8 units (circuit breaker of type C) at 230VAC |
| LEAKAGE CURRENT | <0.75mA / 277VAC |
| NO LOAD / STANDBY POWER CONSUMPTION | No load power consumption <0.5W for A,<0.75W for I series Standby power consumption <0.5W for AB-Type(Dimming OFF) |
| OVER POWER | 110-150% Over Power Protection, recovers automatically after fault condition is removed |
| OVER CURRENT | Constant current limiting, recovers automatically after fault condition is removed |
| SHORT CIRCUIT OVER TEMPERATURE | Constant current limiting, recovers automatically after fault condition is removed Hiccup mode, recovers automatically after fault condition is removed |
| INPUT OVER VOLTAGE Note.8 | 320 ~ 370VAC (Shut down output voltage when the input voltage exceeds protection voltage,recovers automatically after fault condition is removed) Can survive input voltage stress of 440Vac for 48 hours |
| WORKING TEMP. | Tcase=-40 ~ +85℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section) |
| MAX. CASE TEMP. | Tcase=+85℃ |
| WORKING HUMIDITY | 20 ~ 95% RH non-condensing |
| STORAGE TEMP. | -40 ~ +80℃ |
| TEMP. COEFFICIENT | ±0.03%/℃ (0 ~ 60℃) |
| VIBRATION | 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes |
| SAFETY STANDARDS Note.8 | UL8750(type”HL”), CSA C22.2 No. 250.13-12; ENEC AS/NZS IEC BS EN/EN61347-1, AS/NZS BS EN/EN61347-2-13 independent, BS EN/EN62384; IP67; GB/T19510.1,GB/T19510.213, EAC TP TC 004,J61347-1(H29), J61347-2-13(H29),KC61347-1,KC61347-2-13,IS15885(Part2/Sec13)( for XLG-25I type only); NOM-058-SCFI-2017 approved |
| WITHSTAND VOLTAGE | I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC |
| ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH |
| MTBF | 3931.6 K hrs min. Telcordia SR-332 (Bellcore) 399.9Khrs min. MIL-HDBK-217F (25℃) |
| DIMENSION | 105*63*30mm (L*W*H) |
| PACKING | 0.41Kg;24pcs/ 10.5Kg/0.81CUFT for A-type 0.42Kg;24pcs/ 11Kg/0.81CUFT for AB-type |
| Copyright | Haiphongtech.vn |
Liên hệ
Vui lòng liên hệ Hải Phòng Tech để biết thêm thông tin về sản phẩm.
