Thông số kỹ thuật FD-G200
| Thông số | Giá trị |
|---|---|
| Model | FD-G200 |
| Pipe size – DN (Diameter Nominal) | 150 A, 200 A |
| NPS (Nominal Pipe Size) | 6″, 8″ |
| Outer diameter of pipe | ø163 to 171 mm6.42″ to 6.73″, ø214 to 222 mm8.43″ to 8.74″ |
| Pipe thickness | 3.5 to 8.7 mm0.14″ to 0.34″ |
| Supported pipe materials | Iron, steel, stainless steel |
| Supported fluids | Air, Nitrogen, other gases*1 |
| Fluid temperature | 0 to 60ºC32 to 140 °F |
| Recommended pressure | 0.4 MPa or greater (58 PSI or greater) |
| Rated velocity of flow range | Up to 15 m/s |
| Actual flow rate range (typical) – m3/h | Pipe size 150 A: 1000.0Pipe size 200 A: 1800.0 |
| L/min | Pipe size 150 A: 17000Pipe size 200 A: 30000 |
| CFM | Pipe size 150 A: 600.00Pipe size 200 A: 1100.00 |
| Standard flow rate range (typical) [CFM] – 20°C68°F60 psi 0.41 MPa | Pipe size 150 A: 2842.15Pipe size 200 A: 5210.62 |
| 20°C68°F80 psi 0.55 MPa | Pipe size 150 A: 3603.18Pipe size 200 A: 6605.84 |
| 20°C68°F100 psi 0.69 MPa | Pipe size 150 A: 4364.21Pipe size 200 A: 8001.06 |
| 20°C68°F120 psi 0.83 MPa | Pipe size 150 A: 5125.24Pipe size 200 A: 9396.28 |
| Display | QVGA 2.2″ LCD color monitor |
| Display update cycle | Approx. 3 Hz |
| Display resolution – Instantaneous flow rate | 0.1 m3/h, 1 L/min, 0.1 CFM |
| Consumption/leakage amount | 0.1 m3, 1 L, 1 CF |
| Response time | 1.0 s/2.5 s/5.0 s/10.0 s/30.0 s/60.0 s/120.0 s/200.0 s (variable) |
| Measurement accuracy – Between 10 and 100% of F.S. | ±2.0% of RD*2*3*4*5 |
| Between 1 and 10% of F.S. | ±1.0% of F.S.*2*3*4*5 |
| Zero point error | ±0.15% of F.S.*2*6 |
| Static leakage repeatability | ±1.0% of RD*4*7 |
| Hysteresis | Variable |
| Flow units | CFM(S), CFM, m3/h (N), m3/h (S), m3/h, L/min (N), L/min (S), L/min |
| I/O wiring connection port | M12 4-pin connector (male) |
| Detection mode (switchable) – ch.1 | Instantaneous flow mode/area mode/pulse (+) mode/integrated flow mode/warning mode (consump)*8 |
| ch.2 | Instantaneous flow mode/area mode/pulse (−) mode/warning mode (leak)/error output mode/analog output/integrated flow reset/flow rate zero input/origin adjustment input*8 |
| Standard I/O (switchable) – Control output (ch.1/ch.2) | NPN/PNP setting switchable, open collector output 30 VDC or less, max. 100 mA/ch, residual voltage: 2.5 V or less |
| Analog output (ch.2) | 4 to 20 mA/0 to 20 mA, load resistance: 500 Ω or less |
| External input (ch.2) | Short-circuit current: 1.5 mA or less, input time: 20 ms or more |
| Protection circuit | Power supply reverse connection protection, power supply surge protection, short-circuit protection for each output, surge protection for each output |
| Analog input (for volume conversion) | M8 4-pin connector (female), analog current input (4 to 20 mA), input resistance: 100Ω or less |
| Power supplied to pressure sensor | Supply voltage: Equivalent to voltage applied to the FD-G, Supply current:70 mA or less (analog output of the pressure sensor included) |
| Communication interface – USB | USB 2.0 |
| Ethernet – Standard | IEEE 802.3u (100BASE-TX) |
| Transmission rate | 100 Mbps |
| Cable | Category 5 or higher STP (shielded twisted pair) or UTP (unshielded twisted pair) cable |
| Connector | M12 connector (female, D-code) |
| Network function | Modbus TCP, EtherNet/IPTM, IO-Link*9 |
| Recording capacity – Consumption amount/ leakage amount | Approx. 5 years |
| Events | 100 |
| Power supply – Power voltage | 20 to 30 VDC including 10% ripple (P-P), Class 2 |
| Power consumption | 350 mA or less at 20 V, 290 mA or less at 24 V, 230 mA or less at 30 V (load current excluded) (analog output of the pressure sensor excluded),550 mA or less at 20 V, 490 mA or less at 24 V, 430 mA or less at 30 V (Maximum load current excluded) (analog output of the pressure sensor excluded) |
| Environmental resistance – Enclosure rating | IP65/67 (IEC 60529)*10 |
| Ambient temperature | Detection head: −10 to +60°C14 to 140°F(no freezing), display unit: −10 to +55°C14 to 131°F(no freezing) |
| Relative humidity | 5 to 85%RH (no condensation) |
| Vibration resistance | 10 to 500 Hz, power spectral density: 0.816 G2/Hz, XYZ axes |
| Shock resistance | 100 m/s2, 16 ms pulse, XYZ axes, 1000 times for each axis |
| Material – Display unit | Body: PBT + coating, display: PMMA, Power supply port: SUS304-equivalent, Ethernet port: zinc nickel plating |
| Detection head | Body: PPS/SUS304, rear surface: rubber |
| Mounting/damping bracket | SUS304 |
| Weight | Approx. 2.8 kg |
| Copyright | Haiphongtech.vn |
Liên hệ
Công ty TNHH Hải Phòng Tech là đại lý phân phối chính thức của hãng KEYENCE. Quý khách vui lòng liên hệ Hải Phòng Tech để nhận được báo giá ưu đãi nhất.
